Mobile: 135-9455-3299 / 135-9455-3299
Address: No. 2 Workshop, Laoniwan Community, Shilong Village, Jiguanshi, Nanan District, Chongqing
|Source of information: http://525line.com/ Published: Chongqing electric curtains, Chongqing electric indoor and outdoor covering Browse times: 2019.07.03 http://525line.com/|
Although the electric roller shutter is more convenient to use, if it is not used properly, it will cause damage to the electric roller shutter. Therefore, we must pay attention to the lubrication and maintenance of the electric roller blind during use, so as not to damage the roller blind.
So what kind of maintenance work do electric roller blinds need to do during use? Master Li told us that he received a lot of repairs for electric roller shutters, which were basically caused by not paying attention to the maintenance of electric roller shutters. For this reason, Master Li gave us the following 8 maintenance suggestions for electric roller shutters, hoping to be helpful to friends.
1. If there is a problem with the bearing of the electric roller shutter, the noise during use of the motor will increase significantly. At this time, we will replace the bearing of the electric roller shutter, and then when the motor of the electric roller shutter is disassembled, We also have to follow the specific steps step by step, and we can't go according to our preferences.
2. Keep the track running smoothly, clean the track of the electric shutter door in time, and keep the interior clean. The motor and drive chain of the electric shutter must be filled with lubricants frequently. Check the components in the control box and the switch control box. Fix the screws, etc., to clean the dust and dirt on the control box, the surface and the buttons to prevent the buttons from getting stuck and not rebounding.
3. The operator is better to check the manual switch and manual lifting decoration of the electric roller shutter frequently to prevent the electric roller shutter from malfunctioning in an emergency situation or causing unnecessary safety accidents.
4. In the normal use process, it is necessary to maintain the lubrication of the electric roller shutter motor. Generally, after the motor has run for a certain period of time, it is necessary to strengthen it. If it is found during operation, such as overheating of the bearing or we When there is a problem with the lubrication product, we need to deal with it in time to dispose of the original lubrication product.
5. When using, we must ensure that the use environment can not be in the humid air for a long time. The surface of the electric roller shutter motor should be very clean, and the place where the air enters should also be free of dust and other impurities.
6. Regularly check the switch of the up and down stroke of the electric roller shutter, add lubricating oil to the stroke controller to maintain normal and good operation. In addition, the operator manually controls the shutter door, check the operation of the checker, check the position of the upper and lower stroke switch, The electric shutter door is in an appropriate position when it is opened or closed, and the electric shutter door is strictly prevented from punching, bottoming or reversing during the inspection process. If an emergency occurs, stop turning immediately and cut off the power.
7. When the motor of the electric roller shutter is in a continuous working state, the motor itself will be very hot. We need to find out whether this is a malfunction, or under overloaded work, the motor's own protective measures are not perfect, it must be Check before you determine the fault before you start work.
8. During the use of the electric roller blind, try to keep the controller and voltage as stable as possible. It is forbidden to install it in a very humid environment. In addition, do not open the remote control at will. If you find that the wires on the door are tangled or knotted, it should be timely deal with. Pay attention to whether the passage is blocked and hinder the door from descending. If an abnormal response occurs, stop the motor immediately.
It seems that the use of electric roller blinds is very troublesome. In fact, it is not necessary. We only need to pay attention to the use method in the process of use, and ensure the lubrication of the motor. Electric roller blinds are used more than ordinary curtains, because they can effectively filter out ultraviolet rays, and do not affect the ventilation and light transmission of the room while sound insulation. This is one of the reasons why electric roller blinds are so popular with modern people.
| This article is provided by: Chongqing Lanbo Decoration Materials Co., Ltd. Website: http://525line.com/. |
Tang Ping 135-9455-3299
COPYRIGHT ? 2018 Copyright: Chongqing Lanbo Decoration Materials Co., Ltd. Yu ICP No.18006173 Technical support: Wei Wei Media (QQ: 2932261026)